4.9/5 - (16 oylar)

    The conveyor belt installed on the sarımsak sınıflandırıcı is an important part of the garlic transportation. Therefore, the conveyor belt should be checked when the sarımsak sınıflandırıcı is used. If there are problems with the conveyor belt, it should be adjusted timely to ensure that the garlic sorter can be used smoothly.

Garlic classifying machine1
Garlic classifying machine12

1. Adjust the elastic of the conveyor belt of the sarımsak sınıflandırıcı to a moderate degree, put it into the garlic classifier for operation, and observe the operation of the conveyor belt.

2. If the conveyor belt is in the middle of the tray, it is normal, and no adjustment is needed.

3. If the conveyor belt installed on the sarımsak sınıflandırıcı is skewed to the left, it can be adjusted; “tighten” the left belt, gradual adjustment is needed.Adjust side observation until the conveyor belt is back to the center.If the adjustment nut is found to be tight, be careful not to force adjustment.The conveyor belt on the right can be “adjusted”, which needs progressive adjustment.Adjust side observation until the conveyor belt is back to the center.

4. If the conveyor belt is too large, it will be difficult to recover after slow adjustment, and the conveyor belt on the right can be adjusted quickly first.If the conveyor has friction with the side baffle, pay attention to stop immediately.

About the adjustment problem of sarımsak sınıflandırıcı conveyor belt, hope to help you use garlic classifier correctly!