Note of garlic peeling machine in use and storage
For your safety, please follow the following steps when using the mashine ya kumenya vitunguu to avoid accidental injury.
- Before using the mashine ya kumenya vitunguu, check whether the fasteners are tightened, the rotating part is flexible, whether there is oil in the bearings, and whether the peeling machine is placed stably.In order to ensure the safety of the operator, the motor enclosure must be grounded (the motor enclosure should be reliably connected to the ground by a conductor).
- Turn the mashine ya kumenya vitunguu several times before power supply. If there is crash sound, find out the reason and power again.
Third, the garlic should be selected according to the size of the appropriate screen mesh.
After energizing, the rotor should be tested and whether the steering of the rotor is correct.After the motor starts, the direction of the rotor should be the same as that marked on the machine.After idling for a few minutes, observe whether there is any abnormal sound, and the operation is normal and smooth, the garlic can be put into the mashine ya kumenya vitunguu hopper quantitatively, uniformly and continuously.