How to properly check the garlic peeler

Today, I would like to introduce you to the use of garlic peeling machine. I hope that through today’s introduction, everyone can know more about garlic peeling machine.

1, before use, should first check whether the garlic peeling machine fasteners are tightened, the rotating part is flexible, whether each bearing lubricant. The garlic peeler should be placed on a smooth surface.
2, after two motors start. The steering of the rotor should be consistent with the direction indicated on the implement. Idle for a few minutes, observe whether there is any abnormal sound, and then operate normally, and feed the garlic evenly.
3, intend to feed evenly, the amount, without iron, stones and other debris, in order to prevent the garlic from breaking and causing mechanical failure of the garlic peeling machine. When the full screen surface is covered with garlic, open the switch on the meter port.
4, according to the size of the appropriate screen. When the garlic shell in the garlic increases, the motor can move downwards to increase the volume of the fan belt.
5. When operating, people should not stand on the side belt drive to avoid injury. Use it for a while, when the storage device is ready, it should be dusty appearance, dust and particles to remove other debris inside the residue, and remove the belt for further storage. Diesel cleaning parts of the bearing, dried butter. Use a cloth covered with garlic peeler to place it in a dry place to avoid sun and rain.